Table of Contents
Advertisement
Floor plans/Floor plan editor
12.8
Selecting the floor plan
To select a floor plan:
▶ Select Floor plan selection dropdown list.
▶ Select floor plan.
Selected floor plan appears in the View area.
12.3 "Overview Floor plan editor"
12.9
Deleting a unit from a floor plan
To delete a unit from a floor plan:
▶ Select the floor plan from which the units are to be deleted so that the
floor plan and assigned units appear in the View area.
▶
Select the unit on the floor plan image.
The unit has been deleted from the floor plan.
12.8 "Selecting the floor plan"
12.3 "Overview Floor plan editor"
12.10 Deleting all units from the floor plan
To delete all units from a floor plan at the same time:
▶ Select the floor plan containing all units you wish to delete.
▶ Select Clear floor plan.
All units have been deleted from the floor plan.
To be able to save a floor plan, at least one unit must be assigned to the
floor plan.
▶ Assign at least one unit to the floor plan.
▶ Select Confirm.
The floor plan is displayed with the newly assigned units.
To cancel the operation:
▶ Select Cancel.
12.8 "Selecting the floor plan"
12.3 "Overview Floor plan editor"
12.7 "Assigning units to a floor plan"
12.11 Changing the floor plan name
To change a floor plan name:
▶ Select the floor plan to be edited.
▶ Select
.
The Edit floor plan dialogue box appears.
▶ Enter new floor plan name in the Enter new floor plan name field.
▶ Select Confirm.
The floor plan name is changed and the new name appears in the
Floor plan selection dropdown list.
▶ In the Floor plan editor, select Confirm.
The operation is complete.
To cancel the operation:
▶ Select Cancel.
12.8 "Selecting the floor plan"
12.3 "Overview Floor plan editor"
26
12.12 Deleting a floor plan
To delete a floor plan:
▶ Select the floor plan to be deleted.
▶ Select
.
The warning message Warning appears.
▶ Select Delete.
The floor plan is deleted.
To cancel the operation:
▶ Select Cancel.
12.8 "Selecting the floor plan"
12.3 "Overview Floor plan editor"
12.13 Changing the name of a unit
To change the name of a unit:
▶ Expand the category/group to which the units to be edited belong to
display the units in the Select units area.
▶ Select
to the right of the unit in the Select units area.
The Rename unit dialogue box appears.
▶ Enter new name of the unit in the field.
▶ Select Confirm.
The name of the unit has changed.
To cancel the operation:
▶ Select Cancel.
12.3 "Overview Floor plan editor"
12.4 "Overview of units and groups"
12.14 Closing the Floor plan editor
To close the page Floor plan editor:
▶ Select header >
.
Dashboard appears.
8.2 "Header"
Air Center Control – 6720892123 (2020/06)
Advertisement
Table of Contents
