Advertisement
2. Gently lower the TMA1600 down onto the scanner glass surface.
3. Plug the TMA1600's connector into the 15-pin Accessory port at the back panel
of the scanner. Secure the connector by tightening the retaining screws.
4. Turn the scanner's power switch to "On," and wait for the green lights on the
scanner and TMA1600's front panel to stop blinking and stay on steady.
5. The system will detect your TMA1600 automatically.
Advertisement
Need help?
Do you have a question about the TMA 1600 and is the answer not in the manual?
Questions and answers