Maintenance - Microtek ADF-700 User Manual

Maintenance

Cleaning the Scan Sensor Cover
The transparent cover of the scan sensor area at the bottom of the feeder needs to be
cleaned regularly to maintain clear transparency for quality scanning. Use non-
abrasive lint-free cloth to gently wipe both surfaces of the cover. To remove stains,
use cotton swabs moistened with rubbing alcohol.
Cleaning the Rollers
Prolonged use of the ADF-700 may result in accumulation of ink and other residue on
the feeder's rollers, affecting their efficiency. Check for residue on the rollers if paper
flow through the rollers becomes erratic. Open the feeder cover periodically to clean
the rollers with a lint-free cloth or a swab moistened with water.
Note: Do not attempt to turn the roller while cleaning, as this may damage the train
drive mechanism of the ADF-700.
Roller
Roller
8 Microtek ADF-700 Installing and Getting Started