Installing The Software - Microtek Vantas 3000 User Manual

STOP! Please install the software before connecting the scanner, otherwise
your scanner may not be detected.

Installing the software

The scanner's software comes on CD-ROM and includes a setup wizard
that makes installation a snap. Before starting, close any open
applications:
Under Windows 98
1. Insert the CD into your drive.
2. The Setup Wizard pops up automatically with a few choices for you to make. Make your choices and follow the
instructions.
3. The last screen in the setup wizard asks you to restart Windows.
4. Move on to the next section "Connecting the Scanner" for instructions on how to connect the scanner to your
PC.
Note: If for any reason, the Setup doesn't run automatically, please use the
the Setup.exe file on the CD-ROM.
Note: To ensure that the software driver and application software have been properly installed, under the Windows
Start menu, select Settings, followed by Control Panel. Double-click "Add/Remove Programs." If properly installed,
your scanner driver and application software will be displayed in the list that pops up.
If you try the above and it doesn't seem to work, please check out the
Troubleshooting section at the end of this manual.
Start Run
menu command to launch
5