Connect Scanner - Microtek ScanMaker 5700 Install Manual

Microtek scanmaker 5700: install guide
Hide thumbs Also See for ScanMaker 5700:
Table of Contents

Advertisement

4. Connect scanner

1. Check if the FilmView cover is properly installed with
its connector securely connected to its port.
2. Plug the power adapter into the back of the scanner,
and plug the other end into a wall outlet or power
source.
3. Connect either the FireWire
FireWire or the USB cable
FireWire
FireWire
FireWire
computer and scanner. (Y Y Y Y Y ou can use only one
interface at a time.)
interface at a time.
interface at a time.
interface at a time.
interface at a time.
A
. FireWire cable connections
If your system is FireWire-ready, connect one end of
the FireWire cable to your computer, and connect the
other end of the cable to the scanner's FireWire
connector (either one is applicable).
If your system is not FireWire-ready, you will need to
install a FireWire card. For more details on how to
install the FireWire card, please refer to the FireWire
Installation Guide on a separate sheet included with the
FireWire card.
PC
FilmView cover
USB cable to your
USB cable
USB cable
USB cable
ou can use only one
ou can use only one
ou can use only one
ou can use only one
Mac
FireWire port
(labeled with
" " logo)
B . USB cable connections
Connect one end of the USB cable to your computer,
and connect the other end of the cable to the scanner' s
USB port.
PC
Mac
USB port
(labeled with
USB "
" logo)
4. Turn on the Power switch. The green light on the
scanner front panel will blink for a few seconds and
then stays lit. At the same time the FilmView and
scanner lamps also light up.
5. The system will detect your scanner automatically.
IMPORTANT NOTES
If the system encounters problems, see the Troubleshooting file
in the T T T T T echinfo
echinfo folder on your Microtek CD-ROM.
echinfo
echinfo
echinfo
For users who are using FireWire interface
SE SE, and are having problems in activating their FireWire
SE SE
SE
scanner connection, follow the supplemental steps as
described on the next page first. If the scanner still doesn't
work, see the Troubleshooting file in the T T T T T echinfo
your Microtek CD-ROM.
3
ON OFF
:
FireWire interface
FireWire interface
Windows 98
Windows 98
FireWire interface on Windows 98
FireWire interface
Windows 98
Windows 98
echinfo folder on
echinfo
echinfo
echinfo

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ScanMaker 5700 and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents