Display Format - Toshiba GR-200 Series Instruction Manual

SNTP
10:48 1/4
Server1
0. 0. 0.176
Server2
0. 0. 0. 0
Server3
0. 0. 0. 0
BI SYNC setting
When the "BI SYNC" is set to On in BI SYNC menu, the user can choose a binary input circuit
(BI) as a synchronization standard. Adjustment setting 'SYNC_ADJ' is provided.
Binary synchronization function can be set by the following procedure.
BI SYNC
10:48 1/2
BI_ID
No Assign
SYNC_ADJ
0.000 s
MODBUS SYNC setting
Time Sync
10:48 4/5
MODBUS SYNC
On

Display format

(iv)
Display format of time in the IED can be selected in Display format screen. All time formats
will be displayed according to Date_fmt setting. The IED provides different formats to display
the date. Figure 12.7-5 shows display format menu:
3) The user can set IP address using ▲ or ▼ by each digit.
+
When the user has finished setting IP address of the server, press
+
ENTER.
+
1) Key the Data ID of the BI output
2) Set adjustment time for [SYNC ADJ]
+
+
The "IRIG SYNC" setting is similar to activate by using the On/Off
switch.
1) To carry out the time synchronization with MODBUS, the user
has to switch to On from Off.
+
Display Format
10:48
Date_fmt
YYYYMMDD
Date_delimiter
-
Time_delimiter
:
Figure 12.7-5 Display format menu
- 896 -
1/4
+
+
+
6F2T0200 (0.15)
GRE200 (1,2)