Event Record - Toshiba GR-200 Series Instruction Manual

Clear all information in Fault Record
Record
10:48
Fault Record

Event Record 1

Event Record 2
Event Record 3
Disturbance Record >
_Clear all Records +
Clear Records
Clear All records?
ENTER=Yes CANCEL=No
Event Record
(ii)
"Event Record" sub-menu is of three ones: "Event Record1", "Event Record2" and "Event
Record3". Data and time, device name, and the operation of the device are displayed in each
one, as shown in the example below.
Display of Event Record
Record
10:48
Fault Record
_Event Record 1
Event Record 2
Event Record 3
Disturbance Record >
Clear all Records +
Event Record1
10:48
_Record List
Clear Records
1). Move cursor to the Clear all Records sub menu and press
1/6
ENTER.
>
>
>
>
2). Clear all records if ENTER is pressed. Back to display of
"Record" directly if CANCEL is pressed.
Event record1
10:48
#1 2012-07-25
10:48:21.223
Set.Group change
2
#2 2012-07-25
10:20:21.021
Figure 12.3-3 Display of Event Record
1). Move cursor to Event Record 1, 2, or 3 sub menu and press ►.
2/6
To clear all records, refer to section (i)-3.
>
>
>
>
2). Event Record screen is displayed. Press ► at the Record List
sub menu.
1/2
>
+
- 862 -
1/3
6F2T0200 (0.15)
GRE200 (1,2)