Setting Sub-Menu; Setting Method - Toshiba GR-200 Series Instruction Manual

Setting sub-menu

It is used to view and change settings: Recording, Metering, Communication interface, Relay
application, and Monitoring. This section describes "Setting method for elements, switches,
and list selection", "Protection setting", and others. Furthermore, the confirmation of setting,
and the "On/Off" function used to hide some unnecessary settings are discussed.
Note: The meaning of settings and their setting process are beyond the scope of this
section; the figures are examples only. The user should confirm setting values
after their values are changed.
Setting methods
(i)
There are four modes in "Setting" sub-menu:
1. Element Setting Mode
2. Switch Setting Mode
3. List Selection Mode (items selection)
4. Signal Selection Mode (signal selection)
Element Setting Mode: it is used to set numerical values. Figure 12.5-1
provides an example of the element setting mode.
OC1
10:48
_OC1-b
OC1-c
OC1-angle
Before Changing Setting
Figure 12.5-1 Element Setting Mode display
To begin the setting process, press ENTER. Once the setting has been changed,
the [*] mark will appear alongside the name of the setting. Once the change is
canceled or confirmed, the [*] mark will disappear automatically. For the
setting of a value, follow the steps as shown in Figure 12.5-2
2/8
+
123.00000
+
1.00000
+
45 deg
- 873 -
OC1
10:48 2/8
*OC1-b +
124.00000
OC1-c +
1.00000
OC1-angle +
45 deg
After Changing
6F2T0200 (0.15)
:
1
GRE200 (1,2)