Connector And Flat Cable (Host Interface); Scan Engine Connector And Flat Cable - Datalogic DB0431 Integration Manual

Electrical Integration
Table 7 - Electrical interface of the PARALLEL video connector
Pin
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
For a detailed description of the signals above please refer to the scan
engine integration manual.

Connector and Flat Cable (Host Interface)

The DB0431 decoder is equipped with a 27-pole ZIF connector.
The host connector is 27-pole ZIF connector 0.5 mm pitch made for 0.2 mm
thick flat cables.
KYOCERA 006299027010846+
HIROSE FH19C-27S-0.5SH (99)
Example part number for flex cable: Flexconn HCC27-35(3/5)6-T2TB

Scan Engine Connector and Flat cable

The connectors to the Scan Engines are Kyocera 21-pole ZIF connector hav-
ing a pitch of 0.3mm - series 6283 - ordering code 04 6283 021 002 868.
In order to reduce radiated emission it is strongly recommended to adopt an
EMI-shielded flat cable.
In order to improve MIPI signal quality keep the cable as short as possible.
An example 45mm cable is 100374600 PCB FLEX,21 POLES,SHIELDED, (see
appendix for the drawings).
14
Signal
GND power
PIXEL CLOCK Out
GND power
HSYNC Out
VCC_ILLUM_SYS power
VCC power
VCC_IO power
FLASH_OUT / HW
I/O
TRIGGER
PIXEL0 Out
PIXEL1 Out
PIXEL2 Out
PIXEL3 Out
PIXEL4 Out
PIXEL5 Out
PIXEL6 Out
PIXEL7 Out
VSYNC Out
I2C_DATA I/O
I2C_CLK In
GND power
GND power
I/O type
Ground
I2C Data
Ground
LINE VALID SIGNAL
Illumination system power supply
Digital and sensor power supply
I/O reference and power supply
External illumination system trigger /
Camera HW Trigger
PIXEL BIT 0
PIXEL BIT 1
PIXEL BIT 2
PIXEL BIT 3
PIXEL BIT 4
PIXEL BIT 5
PIXEL BIT 6
PIXEL BIT 7
FRAME VALID SIGNAL
I2C Data
I2C Clock
Ground
Ground
Description
DB0431 OEM DECODER