Table of Contents
Advertisement
OEM Decoder Care
The OEM decoder contains sensitive components which require special han-
dling. Datalogic may not warrant damage due to improper handling.
•
•
System Overview
The Datalogic DB0431 OEM decoder features a digital platform based on a
Microchip ARM A5 processor, able to capture and decode images from either
a MIPI or PARALLEL video interface. The video interfaces are compatible with
any Datalogic 2D undecoded scan engine.
The high performance, low power micro-processor runs the decoding algo-
rithms and handles communication with the external host and manages the
connected scan engine. The host interface is available as a 27-poles zif con-
nector along with a standard micro-USB connector.
The 27-poles connector is exporting all the possible interfaces on the same
model. The form factor of the connector is 27-poles 0.5 mm pitch zif as
described in chapter 3.
Figure 1. Decoder Block Diagram
The 27-poles connector exports all of the user interface (control signals and
UART TTL and USB) and receives power from the host. The micro-USB con-
nector is used to interface USB if a single cable USB user interface application
is implemented. The block called CPU is implementing the digital processing
part and the control of all OEM decoder submodules.
Regulatory
See scan engines documentation for details about LED and Laser safety cer-
tifications.
Integration Guide
Do not disassemble the decoder. Doing so will void the warranty.
Use standard ESD precautions & policies when handling the DB0431
OEM decoder.
Technical Support
3
Advertisement
Table of Contents
