Table of Contents
Advertisement
InTroduCTIon
InTroduCTIon
SECTIONS
Table of Contents
user Guidance & Precautions
Please read the following User Guidance & Precautions carefully before using
the product:
1.
By default, after product power-up, the active channel is #1.
2.
The appropriate usage of peripherals (e.g. keyboard and mouse authentication
device) is described in detail in this User Manual's appropriate sections. Do not
connect any authentication device with an external power source to product.
3.
For security reasons products do not support wireless keyboards and mice. In any
case do not connect wireless keyboard/mouse to product.
4.
This product is equipped with a holographic security tape anti-tamper system.
Any attempt to open the enclosure will destroy the anti-tamper tape. If the unit's
enclosure appears disrupted, please call Belkin Technical Support toll-free at (800)
282-2355. Warranty is void if opened. If product enclosure appears disrupted or if
all channel- select LEDs flash continuously, please remove product from service
immediately and contact technical support.
5.
Connecting external USB devices to product (Keyboard and Mouse):
a.
When connecting a USB device that is not qualified or rejected for security
reasons to product's keyboard or mouse port, the associated LED will turn Red
and USB device will be inoperable.
b.
When connecting a USB device that is undetectable for any reason (e.g. failed
device, non-standard device etc.) to product's keyboard or mouse port, the
associated LED will not illuminate at all and device will be inoperable.
c.
A green light indicates the device was accepted and connected.
6.
Do not connect product to computing devices:
a.
That include telecommunication equipment;
b.
That include frame grabber video cards;
Belkin Modular Secure KM Switch
1
1
2
7.
8.
9.
10. If you are aware of any potential security vulnerability while installing or operating
3
3
4
Product has a remote control port in the front panel labeled RC. Connect the
included remote control to this port should remote control be required.
Important! Before re-allocating computers to channels, it is mandatory to
power cycle product, keeping it powered OFF for more than 1 minute.
Product log access and administrator configuration options are described in
product Administrator Guide.
product, please remove product from service immediately and contact us in one of
the ways listed in this manual.
5
6
baCK To Table of ConTenTs >
baCK To Table of ConTenTs >
Advertisement
Table of Contents
