Table of Contents
Advertisement
InTroduCTIon
SECTIONS
Table of Contents
user Guidance & Precautions
Please read the following User Guidance & Precautions carefully before
using the product:
1.
As product powers-up it performs a self-test procedure. In case
of self- test failure for any reason, including jammed buttons, the
product will be Inoperable. Self-test failure will be indicated by the
following abnormal LED behavior:
a.
All channel-select LEDs will be turned ON and then OFF;
b.
A specific, predefined LED combination will be turned ON;
c.
The predefined LED combination will indicate the problem type
(jammed buttons, firmware integrity).
Try to power cycle product. If problem persists please contact your
system administrator or technical support.
2.
By default, after product power-up, the active channel is #1.
3.
The appropriate usage of peripherals (e.g. keyboard, mouse,
display, authentication device) is described in detail in this User
Manual's appropriate sections. Do not connect any authentication
device with an external power source to product.
4.
For security reasons products do not support wireless keyboards
and mice. In any case do not connect wireless keyboard/mouse to
product.
5.
For security reasons products do not support microphone/line-in
audio input. In any case do not connect a microphone to product
audio output port, including headsets.
Belkin
Secure DVI-I KVM Switch with Audio User Manual
®
1
2
3
3
4
5
6.
Product is equipped with an always-on active anti-tampering
system. Any attempt to open product enclosure will activate the
anti-tamper system indicated by all channel-select LEDs flashing
continuously. In this case, product will be inoperable and warranty
void. If product enclosure appears disrupted or if all channel- select
LEDs flash continuously, please remove product from service
immediately and contact technical support.
7.
Connecting external USB devices to product CAC port:
a.
When connecting a USB device that is not qualified or rejected
for security reasons to product's CAC port, the CAC LED will
flash green and USB device will be inoperable.
b.
When connecting a USB device that is undetectable for
any reason (e.g. failed device, non-standard device etc.) to
product's CAC port, the CAC LED will not illuminate at all and
device will be inoperable.
8.
Do not connect product to computing devices:
a.
That include telecommunication equipment;
b.
That include frame grabber video cards;
c.
That include special audio processing cards.
9.
Product has a remote control port in the back panel labeled DCU.
Do not use this port - it is inoperable and for future use.
6
7
8
Advertisement
Table of Contents
