Belkin F1DN002MOD-KM-4 Quick Installation Manual

Quick Installation Guide
2/4 Port Modular Secure KM Switches
Objectives
• This guide includes instructions for installing Belkin Modular Secure KM Switches. A modular secure KM will need to be connected by cables designed to support
USB keyboard and mouse to host computers. Consult the user manual or your Belkin representative for the correct cables required. Without the correct cables, the
modular secure KM cannot be made operational.
• A KM allows sharing keyboard and mouse between multiple computers by navigating to each host computers video display(s) via mouse and keyboard.
• This Manual and additional product documentation is available for online download on Belkin website. For further assistance please refer to: http://www.belkin.com/
us/Resource-Center/Cybersecurity/Secure-KVM-Switching/.
General
• Verify that all peripherals and computers are turned OFF prior to
connecting them to the product.
• Verify that you have the correct modular cables for your install.
• The KM's back panel is divided into sections for Computer Ports.
– Using proper mounts and mounting techniques, secure the unit to its
mount (optional equipment)
– Connect the provided remote control to the front panel via the
supplied cable (if required).
– Connect each computer that needs access to shared peripherals to a
F1DN004MOD-KM-4 Model is shown
Connect peripherals to the KM

Console Ports:
• Keyboard & Mouse: Connect a USB keyboard
and mouse to the corresponding USB ports on
the front panel.
Connect computers to the KM

Computer ports:
• Computer keyboard & mouse connection:
Connect each computer to the KM keyboard
& mouse computer port using modular host
cable Connect the USB A end to the computer.
Mounting Options and Remote

Control:
The modular secure KM is very small in
footprint. As such it is highly suggested that
the unit be mounted in a convenient location at
the desktop using one of the optional mounts
provided by Belkin. Each mounting option has
been designed to facilitate a position on or
near the desktop. See the Belkin web site or
contact your Belkin representative for a full
understanding of the multiple options, which
include an on desk/under desk mount, a VESA
back of the monitor mount, as well as a single
and dual monitor stand with an integrated
mount.
F1DN002MOD-KM-4: Belkin 2-Port Modular Secure Desktop KM Switch, PP4.0
F1DN004MOD-KM-4: Belkin 4-Port Modular Secure Desktop KM Switch, PP4.0
• Installation:
– Choose the mount
– Install the modular KM unit with it's
modular cables to the mount
– Install the remote control (if applicable) on
the desktop near the mouse with enough
cable loop to provide easy access and
movement for the operator. NOTE: when
using the remote control, the top panel
buttons are disabled.
– Connect per section 1 and 2.
specific Computer Ports section via the supplied modular cable.
– Make sure that every computer is connected to a separate Computer
Port section.
– The push buttons on the product's top panel indicate which computer
has currently access to shared peripherals.
– To switch peripherals between computers, press the KM hot key on
the keyboard and move the mouse to the computer to be active, or
push the appropriate button on the product's top panel, or use the
channel buttons on the remote control.
Source PC
X 4
Power ON your system:

• Power ON the monitor/s: Make sure that the
monitor/s is/are turned ON prior to powering
ON the KM.
• Power ON the system: Connect all peripherals
and computers to the KM prior to powering
it up. Power ON the KM by plugging it to
the AC wall outlet. By default, after product
power-up, the active channel will be computer
#1, indicated by the applicable top panel or
remote control button LED lit, the mouse shall
also be on computer 1.
Source Ports
8820-02950 Rev.A00