Related Manuals for Belkin BusStation F5U1000
Summary of Contents for Belkin BusStation F5U1000
-
Page 1: User Manual
BusStation ™ MODELS F5U100, F5U100-BLU, F5U100-SLV, F5U100-ORG User Manual P73281 Downloaded from www.Manualslib.com manuals search engine... - Page 2 USB port module off the BusStation ™ you have room to snap in one of the many available Belkin USB modules, including SCSI ports, Ethernet ports, serial ports and more. Configure it to fit your own computing needs, build your own multifunction hub - because it’s USB, you don’t even have to...
- Page 3 • Gives you the ability to configure your own multifunction hub or docking station to fit your own computing needs. • Works with the Belkin complete selection of modules that cover virtually every possible configuration. • Compatible with Windows ®...
- Page 4 Belkin BusStation ™ Figure 1 • LEDs to • 3 Removable indicate modules status Front View • Downstream ports • DC 5V 4A • Root port power jack Back View Downloaded from www.Manualslib.com manuals search engine...
-
Page 5: System Requirements
® 98, Windows ® 2000, Mac ® 8.1 or higher PACKAGE INCLUDES • Belkin BusStation ™ • USB Device Cable • 5 Volt 4 Amp power adapter • User Guide Installation 1. Attach the power adapter to the power jack of the BusStation ™... - Page 6 Installation (cont’d.) Figure 2 Figure 3 Figure 4 Adding Modules to the BusStation ™ By adding modules to the BusStation ™ , you can have your own custom-configured multi-function USB hub or docking station. You can add and subtract components from a complete selection of modules that cover virtually every possible configuration.
- Page 7 Instructions for Adding Modules Removing the sleeve from the Belkin USB Module: Hold the module in both hands. Pull one side of the sleeve outward. (See Figure 5). The sleeve should slide off easily. Figure 5 Downloaded from www.Manualslib.com manuals search engine...
- Page 8 Instruction for Adding Modules (cont’d.) When attaching additional modules to the BusStation ™ , there is no need to power down your computer, or unplug the BusStation ™ Note on Power Consumption USB specifies that each port can only draw a maximum of 500mA of electrical current.
- Page 9 Note: Modules should only be added starting from the 4 Port Hub base of the module working your way up. Remove the sleeve from the USB module following the instructions in Figure 5. Place the module you wish to add in the first empty slot directly above the 4 Port hub.
-
Page 10: Removing Modules
Removing Modules Instructions for removing modules from the BusStation ™ Note: Modules should be removed from top to bottom. Do not remove the middle modules first, doing so will cause severe damage to your equipment and/or the BusStation ™ Hold the BusStation ™... -
Page 11: Technical Specifications
• USB Serial Adapter • USB Serial Adapter with colored sleeves • USB Ethernet Adapter • USB SCSI Adapter Belkin USB modules are continuously being developed. Visit our website for additional modules. The possibilities are endless... Seven port Two serial and... - Page 12 Diamantlaan 8 • 2132 WV Hoofddorp • The Netherlands Tel: +31 (0) 235698765 Fax: +31 (0) 235612694 © 2000 Belkin Components. All Rights Reserved. All Trade Names Are Registered Trademarks Of Respective Manufacturers Listed. P73281 Downloaded from www.Manualslib.com manuals search engine...