Table of Contents
Advertisement
FOR YOUR OWN SAFETY, ALWAYS TURN OFF AND UNPLUG THE
MACHINE BEFORE CARRYING OUT ANY TROUBLESHOOTING.
SYMPTOM
Saw blades break
Motor does not
function
Vibration
The saw
NOTE:
vibrates slightly when
the motor is running in
normal operation
Saw blade not
aligned straight
TROUBLESHOOTING
WARNING
!
PROBABLE CAUSE
Tension incorrectly set
Load to great
Incorrect saw blade variety
Work piece not fed straight
Power cable faulty
Motor faulty
Motor control board failure Change a new control board
Unsuitable underlay
Saw blade incorrectly
installed
The scroll saw is not
secured to bench or stand
Holders not aligned
15
CORRECTIVE ACTION
Set the correct tension
Feed the work piece more
slowly
Use the correct saw blades
Avoid exerting side pressure
Change faulty cable
Call customer service. Do
not a t t e m p t to repair the
motor yourself as this should
be carried out by trained
personnel.
The heavier the work bench is
the less the vibration. A bench
made from plywood always
vibrates more than one made
from solid wood.Select the
work bench best suited to your
working conditions.
Refer to the instructions
in this manual on page 13.
Secure the scroll saw to the
workbench or stand.
Align the screws in the holders
so that they are perpendicular
to each other and retighten
the screws.
Advertisement
Table of Contents
