Led Indicators; Buttons - Axis A1210 User Manual

Specifications
- Reader I/O: DC output: 2x 12 V DC output, max 486 mA; 2x2 configurable supervised inputs/outputs (digital
input: 0 to max 30 V DC; digital output: 0 to max 30 V DC, open drain max 100 mA)
- Reader data: OSDP/RS485 half duplex, Wiegand
- Auxiliary: DC output: 1x 12 V DC output, max 200 mA, 4x configurable inputs/outputs (digital input: 0 to max
30 V DC; digital output: 0 to max 30 V DC, open drain max 100 mA)
- Door connections: 2x2 supervised inputs for door monitors and REX (digital input: 0 to max 30 V DC)
- External: 2x configurable inputs/outputs for auxiliary equipment (digital input: 0 to max 30 V DC; digital
output: 0 to max 30 V DC, open drain max 100 mA)
• Cable requirements
- Wire size for connectors: CSA: AWG 28–16, CUL/UL: AWG 30–14
- DC power and relay: AWG 18-16
- Ethernet and PoE: STP CAT 5e or higher
- Reader data (RS485): 1 twisted pair with shield, qualified for up to 1000 m (3281 ft)
- Reader data (Wiegand): Qualified for up to 150 m (500 ft)
- Reader powered by controller (RS485): AWG 20-16, qualified for up to 200 m (656 ft) (Depending on the
reader's voltage and current input range. Evaluated with A4020-E and A4120-E.)
- Reader powered by controller (Wiegand): AWG 20-16, qualified for up to 150 m (500 ft) (Depending on the
reader's voltage and current input range.)
- I/Os as inputs: Qualified for up to 200 m (656 ft)

LED indicators

LED Color
Network Green
Amber
Unlit
Status Green
Amber
Red
Power Green
Amber
Relay Green
Unlit
1. Relay is active when COM is connected to NO.

Buttons

Control button
The control button is used for:
Indication
Steady for connection to a 100 MBit/s network. Flashes for network activity.
Steady for connection to a 10 MBit/s network. Flashes for network activity.
No network connection.
Steady green for normal operation.
Steady during startup and when restoring settings.
Slow flash for failed upgrade.
Normal operation.
Flashes green/amber during firmware upgrade.
1
Relay active.
Relay inactive.
23