Table of Contents
Advertisement
Device Management
3.2 Configuring the Device
device's IP address. The factory default IP address for the RUGGEDCOM M969F is
https://192.168.0.1.
For more information about available ports, refer to
Ports" (Page
3.2
Configuring the Device
Once the device is installed and connected to the network, it must be configured.
All configuration management is done via the RUGGEDCOM M969F interface. For
more information about configuring the device, refer to the "RUGGEDCOM M969F
Configuration Manual" associated with the installed software release.
18
19).
"Communication
Installation Manual, 11/2022, C79000-G8976-1349-04
RUGGEDCOM M969F
Advertisement
Table of Contents
Need help?
Do you have a question about the SIMATIC NET RUGGEDCOM M969F and is the answer not in the manual?
Questions and answers