For Global mesh network settings, on GWN76XX, navigate to the menu
for setting up the following parameters described below:
The following table down below describes the Mesh configuration settings for the GWN76XX:
Filed
Description
Enable Mesh
When checked the Mesh feature will be activated. Default is disabled.
Scan Interval
Interval in seconds to scan for available Mesh neighbors. Must be less than or equal to 300 seconds.
Interface
5GHz band. Note: Mesh does not support 2.4GHz, due to the channel interference.
Wireless
Define how many AP can be cascaded wirelessly with the AP. The minimum value is 1 and maximum
Cascades
value is 3.
For more detailed information about GWN Mesh network feature, you may refer to the following technical document:
Network
Guide.
Access Points Status
"System
Mesh settings for GWN76XX
Mesh configuration on GWN76XX
Settings
Mesh"
Mesh