Grandstream Networks GWN76 Series User Manual page 97

Basic page allows Country and Time configuration.
Field
LED VLAN VLAN ID
Allow DHCP Option 43
to Override
Management VLAN
Rebind Protection
Legacy TLS
Compatibility
Web HTTPS Port
Country/Region
Scene
Time Zone
NTP Server
Date Display Format
Reboot Schedule
Device
GWN7610
GWN7600
GWN7600LR
GWN7630
GWN7630LR
GWN7602
GWN7605
GWN7605LR
GWN7615
GWN7660 GWN7660LR
GWN7664 GWN7664LR
GWN7625
Account
The Access Web page provide configuration for admin and user password.
Description
This feature is an enhancement in regards of optimizing and reducing energy consumption of
the AP. User can select to either Always on / Always off or to Schedule the period where the
LEDs can remain on Management VLAN: This feature allows GWN AP to be
discovered/managed on VLAN network. If enable, AP will get ip from this vlan. Enter VLAN ID
Configures AP to get provisioned for management VLAN from DHCP Option 43 in the local
server automatically. The default management VLAN will be overridden by the provisioned
settings. Note: Once enabled, users cannot manually change the management VLAN.
Anti-domain name hijacking protection. If enabled, when the address returned by the superior
DNS is a private LAN address, it will be regarded as a domain name hijacking, thus discarding
the analytical result. If disabled, the analytical results will not be discarded.
Due to the security enhancement, unless Legacy TLS Compatibility (only available on 1.0.15.4 or
higher version) is enabled, master AP on 1.0.15.4 or higher firmware will not be compatible with
slave AP on firmware lower than 1.0.15.4. Master AP on firmware lower than 1.0.15.4 will also not
be compatible with slave AP on firmware 1.0.15.4 or higher. Cloud and GWN Manager will still
support both firmware. Default is enabled.
Specifies HTTPS port. By default, is 443.
Select the country from the drop-down list. This can affect the number of channels depending
on the country standards.
Depending on deployment type (Indoor or Outdoor) then additional 5Ghz channels (DFS
Channels) will be available to be used. Please refer to table DFS Channels supported by Model.
Note: This field appears for Country/Region supporting DFS
Configure time zone for the GWN76XX. Make sure to reboot the device to take effect.
Configure the IP address or URL of the NTP server. The device will obtain the date and time
from the configured server.
Change the Date Display Format, three options are possible YYYY/MM/DD, MM/DD/YYYY and
DD/MM/YYYY.
Select the time schedule when AP will be rebooted. Refer to [S] to define time.
Firmware CE
1.0.23.3 –
1.0.23.3 –
1.0.23.3 Yes
1.0.23.9 Yes
1.0.23.9 Yes
1.0.23.8 Yes
1.0.23.9 Yes
1.0.23.9 Yes
1.0.23.9 Yes
1.0.23.3 1.0.23.3 Yes Yes
1.0.23.3 1.0.23.3 Yes Yes
1.0.23.9 Yes
DFS Channels supported by Model
Basic
RCM FCC IC
– – –
– – –
– – –
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes Yes Yes Yes
Yes Yes Yes Yes Yes Coming soon
Yes Yes Yes
ANATEL(Brazil)
–
Yes
–
Yes
–
Yes
–
–
–
–
–