Grandstream Networks GWN76 Series User Manual page 65
Wi-fi access points
Hide thumbs
Also See for GWN76 Series:
- User manual (131 pages) ,
- Master/slave architecture manual (15 pages) ,
- User manual (113 pages)
Table of Contents
Advertisement
Choose the Channel Width, note that wide channel will give better speed/throughput, and narrow
Channel Width
channel will have less interference. 20Mhz is suggested in very high-density environment. Default is
"Use Radio Settings", the AP then will use the value configured under Radio page.
Select Use Radio Settings, or a specified channel, default is Auto. Note that the proposed channels
Channel
depend on Country Settings under System Settings��Maintenance. Default is "Use Radio Settings", the
AP then will use the value configured under Radio page.
Set the Radio Power depending on desired cell size to be broadcasted, five options are available: "Low",
Radio Power
"Medium", "High", "custom" and "Use Radio Settings". Default is "Use Radio Settings", the AP then will
use the value configured under Radio page.
Custom
When Radio Power is set to "Custom", allow users to set a custom wireless power for both
2.4GHz/5GHz Tx
5GHz/2.4GHz band, the value of this field must be between 1 and 31.
Power (dBm)
Enable
Configures whether to enable/disable Minimum RSSI function. This option can be either Disabled or
Minimum RSSI
Enabled and set manually or set to Use Radio Settings.
Minimum
Specify whether to limit the minimum access rate for clients. This function may guarantee the
Access Rate
connection quality between clients and AP. This option can be either Disabled or Enabled and set
Limit
manually or set to Use Radio Settings.
Note:
The administrator can filter access points by Model or search by name/MAC of the device. Click on Save Button to save the
changes and apply them to the AP.
Reset Access Points
To reset an access point, select and click on
confirm the operation.
SSIDs
When using GWN76XX as Master Access Point, users can create different SSIDs and assign GWN76XX Slave Access Points to
them.
Log in as Master to the GWN76XX Web GUI and go to SSIDs.
Access Point Configuration Settings
button, a confirmation message will be displayed, click on
Reset Access Point
SSIDs
to
Advertisement
Table of Contents
