Step 2:
Place the ceiling backing plate in the center of the ceiling tile and mark the mounting screw holes (screw holes DIA 5.5mm,
reticle hole DIA 25mm).
Step 3:
Insert the screws through the mounting bracket.
Step 4:
Connect the power cable and the Ethernet cable (RJ45) to the correct ports of your GWN76XX.
Step 5:
Align the arrow on the GWN AP with the arrow on the locking tab of the mounting bracket and ensure that your GWN is
firmly seated on the mounting bracket and connect the network and power cables.
Ceiling Mount – Steps 1 & 2
Ceiling Mount – Step 3
Ceiling Mount – Step 4
Ceiling Mount – Steps 5 & 6