Client Bridge - Grandstream Networks GWN76 Series User Manual

When the process is finished, the original Master will turn to be a slave for the new Assigned Master, and to login to the new
Master AP web interface, you will need to use the previous Master Admin password.
Note
All the previously existed paired APs will be
provisioned with the new Master AP.
The Switch to Master option is unlimited action and does not require any reset for the already paired Aps.

Client Bridge

The Client Bridge feature allows an access point to be configured as a client for bridging wired only clients wirelessly to the
network. When an access point is configured in this way, it will share the Wi-Fi connection to the LAN ports transparently. This
is not to be confused with a mesh setup. The client will not accept wireless clients in this mode.
Once a SSID has the Client Bridge Support enabled, the AP adopted in this SSID can be turned in to Bridge Client mode
by click the then the Bridge button
Please be noted that once an AP it turned into Client Bridge mode, it cannot be controlled by a Master anymore, and a factory
reset is required to turn it back into normal AP mode.
Transfer Master Role to another device confirmation message
Then new assigned Master AP web interface
.
Client Bridge