Grandstream Networks GWN76 Series User Manual page 85

Configures interval between beacon transmissions/broadcasts. The Beacon signals help to keep the
network synchronized and provide main information about the network such as SSID, Timestamp...
• Using High Beacon Interval: AP will be sending beacon broadcast less frequently. This will help to
get better throughput, thus better speed/performance. It also helps to save Wi-Fi clients energy
consumption.
Beacon Interval • Using Low Beacon Interval: AP will be sending beacon broadcast more frequently. This can help in
environments with weak signal areas; sending more frequently beacons will increase chances to be
received by Wi-Fi clients with weak signal.
Notes: When AP enables less than 3 SSIDs, the interval value which will be effective are the values
from 40 to 500. When AP enables more than 2 but less than 9 SSIDs, the interval value which will be
effective are the values from 100 to 500. When AP enables more than 8 SSIDs, the interval value which
will be effective are the values from 200 to 500. Mesh feature will take up a share when it is enabled.
Wi-Fi5 Some old devices do not support Wi-Fi6 well and may not be able to scan the signal or connect
Compatible poorly. After turning on this switch, it will switch to Wi-Fi5 mode to solve the compatibility problem. At
Mode the same time, it will turn off Wi-Fi6 related functions. Note: Only take effect for GWN766x(LR).
Country/Region Displays the country/region of the AP.
Scene Displays the Scene of the AP.