Related Manuals for MiLAN MIL-S16002TG Series
Summary of Contents for MiLAN MIL-S16002TG Series
-
Page 1: User Guide
MIL-S16002TGxx 16-port 10/100/1000 TX 2 Combo SFP Slots Unmanaged Switch User Guide Rev.B 08-DEC2005... - Page 2 In no event shall MiLAN Technology be liable for incidental or consequential damages, costs, or expenses arising out of or in connection with the performance of the product delivered hereunder.
-
Page 3: Table Of Contents
Content 1. Introduction ... 1 Features... 1 Package Contents... 2 2. Hardware Description... 3 Front Panel ... 3 Rear Panel... 4 LED Indicators ... 4 3. Installation ... 6 4. Network Application... 7 5. Troubleshooting ... 8 6. Technical Specification... 9... -
Page 4: Introduction
1. Introduction The 16-port 10/100/1000 TX plus 2 combo SFP Slots Switch is an ideal solution for solving traffic block at the core of the network. It offers 16x auto-negotiating 10/100/1000Base-T Gigabit Ethernet ports that can significantly improve your network backbone performance. -
Page 5: Package Contents
The 16-port 10/100/1000 TX plus 2 Combo SFP Slots Switch User Guide Compare the contents of your 16-port 10/100/1000 TX plus 2 Combo SFP Slots Switch package with the standard checklist above. IF any item is missing or damaged, please contact your local dealer for service. -
Page 6: Hardware Description
(100/1000, Link/Activity, Full duplex/Collision) for each Gigabit port and power LED-indicator for unit. Figure 2-1. The Front Panel of the 16-port 10/100/1000 TX plus 2 Combo SFP Slots Switch RJ-45 Ports (Auto MDI/MDIX): 16 x auto-negotiation 10/100/1000 Mbps Ethernet RJ-45 connectors [Auto MDI/MDIX means that you can connect to another switch or workstation without changing straight through or crossover cabling.]... -
Page 7: Rear Panel
The 3-pronged power plug, on/off switch, and Ventilation fan are located at the rear Panel of the 16-port 10/100/1000 TX plus 2 Combo SFP Slots Switch as shown in Figure 2-2. The Switch will work with AC in the range 100-240V AC, 50-60Hz. -
Page 8: Combo Sfp Slots Led
Orange FDX/COL Blinking Table 2-1. The Descriptions of LED Indicators Combo SFP Slots LED 2 Combo SFP Slots ports have two LED indicators – LNK and ACT. The following table provides descriptions of LEDs status and their meaning. Figure 2-4. Combo SFP Slots port LED Indicators Status Green Green... -
Page 9: Installation
Switch from shock/vibration. Power On Connect the cord of power adapter to the power socket on the rear panel of the Switch. The other side of power cord connects to the power outlet. Check the power indicator on... -
Page 10: Network Application
For enterprise networks where large data broadcast are constantly processed, this switch is an ideal suitable for departmental switches to connect to the Core Switch. All ports can connect to departmental switches, and the departmental switches can be connected to the 16-port 10/100/1000 TX plus 2 Combo SFP Slots Switch. -
Page 11: Troubleshooting
(e.g., a network adapter card on the attached device), network cable, or switch port is defective or not. Verify that the switch and attached device are power on. Be sure the cable is plugged into both the switch and corresponding device. Verified the proper cable type is used and its length does not exceed specified limits. -
Page 12: Technical Specification
6. Technical Specification The following table provides the technical specification of the 16-port 10/100/1000 TX plus 2 Combo SFP Slots Switch. Standard Protocol Technology Transfer Rate Connector MAC Address Memory Buffer Network Cable Power Supply IEEE802.3 10BASE-T IEEE802.3u 100BASE-TX IEEE802.3z Gigabit fiber IEEE802.3ab 1000Base-T... - Page 13 0 to 45 (32 to 113 ) Temperature Operation Humidity 10% to 90% (Non-condensing) Dimension 440mm(W) x 224mm(D) x 44mm (H) EMI & Safety FCC Class A, CE, UL, CE/EN60950 1329 Moffett Park Drive Sunnyvale, CA 94089 Phone: +1.408.744.2775 www.milan.com...
Need help?
Do you have a question about the MIL-S16002TG Series and is the answer not in the manual?
Questions and answers