HPE AP-303H-MNT2 Installation Manual page 3

Figure 3 Attaching Wall Mount to Dual Gang Wall Box
8. Remove the #6-32 1.5" slotted screws from their bag and screw the wall mount onto the wall box,
as shown in
9. Connect any required cables to the rear of the access point.
10.Align the mounting slots on the back of your AP-303H access point with the corresponding posts
on the wall mount as shown in
Figure 4 Securing AP-303H access point to wall mount
11.Push the access point against the holes and then downward until the posts engage the slots at the
top of the mounting holes.
AP-303H-MNT2 Mount Kit | Installation Guide
Figure 3.
Figure 4.
3