General Information; Note To The Owner - New Holland WORKMASTER 35 Operator's Manual

Table of Contents

Advertisement

1 - GENERAL

Note to the Owner

This manual contains information concerning the adjustment and maintenance of your new equipment. You have
purchased a dependable machine, but only by proper care and operation can you expect to receive the performance
and long service built into this equipment. Please have all operators read this manual carefully and keep it available
for ready reference.
Your NEW HOLLAND dealer will instruct you in the general operation of your new equipment. (Refer to the 'Delivery
Report' at the back of this manual.) Your dealer's staff of factory-trained service technicians will be glad to answer
any questions that may arise regarding the operation of your machine.
Your NEW HOLLAND dealer carries a complete line of genuine NEW HOLLAND service parts. These parts are
manufactured and carefully inspected to insure high quality and accurate fitting of any necessary replacement parts.
Be prepared to give your dealer the model and product identification number of your new equipment when ordering
parts. Locate these numbers now and record them below. Refer to the 'General Information' section of this manual
for the location of the model and product identification numbers of your machine.
PLEASE RECORD THE FOLLOWING INFORMATION
Model
Product Identification Number (PIN)
Date Purchased
Engine Model
Engine PIN
This is the safety alert symbol. It is used with and without signal words to alert you to potential
personal injury hazards. Obey all safety messages that follow this symbol to avoid possible
death or injury.
WARNING
Illustrations in this manual may show protective shielding open or removed to better illustrate a par-
ticular feature or adjustment.
Replace all shields before operating the machine.
Failure to comply could result in death or serious injury.
IMPROVEMENTS
CNH America LLC is continually striving to improve its products. We reserve the right to make improvements or
changes when it becomes practical and possible to do so, without incurring any obligation to make changes or addi-
tions to the equipment sold previously.

1 - GENERAL INFORMATION

INFORMATION###_1_###
1-1
W0012A

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Workmaster 40

Table of Contents