Road Light/Work Light Operation - New Holland WORKMASTER 35 Operator's Manual

Road light/work light operation

The road lights (1) work lights (2) and taillights (3) are
turned on and off using the multifunction light switch lo-
cated on the left-hand side of the dash panel. The key
must be in the "ON" position for these lights to operate.
The multifunction light switch (1) is a rotary type switch
that has four positions (rotating clockwise from "OFF"
position), three of these positions control the road lights,
work lights, hazard lights, and taillights.
• To operate the work lights, rotate the multifunction
switch until the "WORK LIGHT" symbol (2) is aligned
with the index mark (3) on the switch lever. The instru-
ment panel, side/taillights, road lights, and work lights
will come ON.
• To operate the road lights and hazard lights, rotate the
multifunction switch until the "LOW BEAM" and "HAZ-
ARD" symbols (4) are aligned with the index mark (3) on
the switch lever. The instrument panel, side/taillights,
road lights (low beam), and hazard warning lights will
come ON.
NOTE: For your protection, use the hazard warning lights,
road lights (low beam), and (slow moving vehicle) SMV
sign when traveling on public roads, day or night.
5 - TRANSPORT OPERATIONS
5-3
1
NHAC13CT00138AA
2
NHIL12CT00671AA
3
93099370