Omron NY Series Manual page 92

5 Conversion Procedures
• Select port X1 or X2, default is "X1"
• Select DHCP or Static, default is "static"
• Set the IP address, subnet mask and gateway
4
Run the script.
A message The execution policy helps ... Do you want to change the execution policy?
appears.
5
If you agree in changing the execution policy then select Yes. The IP settings are applied to
Windows.
If the script does not start PowerShell then the ExecutionPolicy has to be set manually:
1) Open an new window in the PowerShell and copy the line of the ExecutionPolicy to this
new file.
2) Run this new file. The ExecutionPolicy is applied.
3) Run D:\OMRON-NY\Scripts\IPConfigure.ps1
The IP settings are set in the Windows settings.
The settings in IPConfigure.ps1 are applied to Windows.
Use Portrait Mode
To change your display from Landscape orientation to Portrait orientation:
1
Rightclick on the desktop and select Display settings.
The Display Settings window opens.
2
Select the Display orientation Portrait .
The display rotates to Portrait mode.
5-20
NY-series NYE Industrial Panel PC Conversion Guideline for NS-series products (P157)