Temperature - Omron NY Series Manual

4-3-3

Temperature

The temperature inside a control panel may be at least 10 to 15°C higher than outside the panel. Im-
plement the following measures against overheating at the installation site and in the control panel,
and allow a sufficient margin for the temperature.
Distance for Cooling
Adequate airflow around the Industrial Panel PC is required.
Additional Information
• The ambient temperature must be within the operating range.
Refer to 3-4-1 Operation Environment Specifications on page 3-11 for temperature specifica-
tions.
• Allow space to accommodate for the bending radius of the cables.
Refer to 2-5 Optional Hardware on page 2-8 for cable bending requirements and connector
clearances.
Provide enough space for good air flow and ensure the following minimum distances are observed
around the sides of the Industrial Panel PC.
X
Landscape orientation.
Item
X 50 mm
Y 100 mm
Z 50 mm
NY-series NYE Industrial Panel PC Conversion Guideline for NS-series products (P157)
A
Y
X
Y
Z
Minimum distance
4 Installation
4
A
4-9