Auto Power On - Omron NY Series Manual

4 Installation
Recent Windows 10 Operating Systems will automatically perform a Windows Update when
the Panel PC is connected to the internet. This will keep the Panel PC occupied for a longer
period of time, wait until it is completed and the Panel PC automatically reboots.
4
Login
5
Check and if necessary adjust the time and the timezone
6
Adjust the backlight, Logo LED, and Status LED brightness to your settings.
Additional Information
Verify that the Panel PC is responding to finger touches on the touchscreen of the product.
7
Install any third party software and drivers that may be required for your applications.
Precautions for Safe Use
Before operating the system, please make sure the appropriate software is installed and config-
ured. Doing so may prevent unexpected operation.
4-6-3

Auto Power ON

The Panel PC can be configured to start up when power is supplied to the power connector.
The Power Loss Control BIOS setting controls this behavior.
Set the Power Loss Control setting to Turn ON to activate the Auto Power ON function.
4-16
NY-series NYE Industrial Panel PC Conversion Guideline for NS-series products (P157)