Table of Contents
Advertisement
Device Management
3.2 Configuring the Device
IP address. For more information about available ports, refer to
Ports" (Page
3.2
Configuring the Device
Once the device is installed and connected to the network, it must be configured.
All configuration management is done via the RUGGEDCOM ROS interface. For
more information about configuring the device, refer to the "RUGGEDCOM ROS
Configuration Manual" associated with the installed software release.
18
19).
"Communication
RUGGEDCOM RS400F
Installation Manual, 11/2022, C79000-G8976-1341-06
Advertisement
Table of Contents
