Table of Contents
Advertisement
(Straight Tip) connectors. Make sure the Transmit (Tx) and Receive (Rx) connections
of each port are properly connected and matched to establish a proper link.
Port Types
1
1
2
Figure 4.3
1
1
2
Figure 4.5
Specifications
For specifications on the available fiber optic Ethernet ports, refer to
Ethernet Port Specifications" (Page
4.3
Modem Port
The RUGGEDCOM RS400F can optionally be equipped with a V.90 Modem
connection for PPP (Point-to-Point Protocol) connections. For information about how
to configure and operate the modem, refer to the "RUGGEDCOM ROS Configuration
Manual" for the RUGGEDCOM RS400F.
Fire hazard – risk of serious personal injury and/or damage to equipment
To reduce the risk of fire, use only #26 AWG or larger telecommunication line cord.
RUGGEDCOM RS400F
Installation Manual, 11/2022, C79000-G8976-1341-06
2
Tx Connector
Rx Connector
MTRJ Port
Tx Connector
Rx Connector
SC Port
WARNING
1
Tx Connector
1
Rx Connector
2
Figure 4.4
2
1
Tx Connector
1
Rx Connector
2
Figure 4.6
28).
Communication Ports
4.3 Modem Port
2
LC Port
2
ST Port
"Fiber Optic
21
Advertisement
Table of Contents
