Unpacking The Unit - Zanotti Zero Series Installation Manual

Refrigeration unit
Series Zero Direct-Drive
Z200 | Z250 | Z350 | Z380
Z380 Multi

3.3 Unpacking the unit

To unpack the unit proceed as follows:
Carefully remove the upper and side structures of the packaging crate, then remove the front panel
•
and the installation kit components supplied with the unit.
Remove the coatings and accessories of the unit present.
•
Remove the dividing box (1, Figure 43), then remove evaporator (2).
•
rev.01
INSTALLATION MANUAL
Figure 43 - Unpacking the evaporator
39