Installation Manual - Zanotti Zero Series Installation Manual

DATE
02/2022
06/2022
The information contained in this manual is the property of ZANOTTI S.p.A.
The drawings and other documents accompanying the refrigeration unit are the property of ZANOTTI
S.p.A.
It is forbidden to distribute and/or duplicate, in any form, this manual, even partially, without the written
authorisation of ZANOTTI S.p.A.
ZANOTTI S.p.A. reserves the right to change, without prior notice, the characteristics of the product
described in this manual.
In case of doubt or difficulty in understanding or interpreting the manual, the original/official version
indicated as "ORIGINAL INSTRUCTIONS" on the cover, must be considered as the valid version.
The contents of this manual have been carefully checked to ensure they correspond to the system in
question.
However, as possible differences cannot be excluded, the contents of this document are periodically
checked and any corrections or modifications will be included in the next edition.
Some of the images included in this manual should only be considered as an example, as they may not
refer to the refrigeration unit described here.
2

INSTALLATION MANUAL

REVISION
REVISION
01
02
Series Zero Direct-Drive
Z200 | Z250 | Z350 | Z380
DESCRIPTION
First version
Edit Oil Compressor %
Refrigeration unit
Z380 Multi
rev.01