Installation; Tools Required - Zanotti Zero Series Installation Manual

Refrigeration unit
Series Zero Direct-Drive
Z200 | Z250 | Z350 | Z380
Z380 Multi

3 INSTALLATION

3.1 Tools required

Before proceeding with the installation of the unit on the truck, it is necessary to check that you have the
following tools available:
Protective goggles and PPE
•
• Drill
• Drill bits
Tape Metro
•
Mechanical tools
•
Ladder
•
• Work platform
• Lifting device
Vacuum pump
•
Dry nitrogen
•
Torque wrench
•
• Torch
• Leak detector
DANGER
Always wear the appropriate PPE.
rev.01
INSTALLATION MANUAL
37