Plant Components - Zanotti Zero Series Installation Manual

1.8 Plant components

The refrigeration unit consists of the following parts (Figure 3):
1. Condenser unit, installed outside the isothermic crate.
2. Evaporative unit installed inside the isothermic crate.
3. Electronic control and command power unit (HMI) , located inside the vehicle cab (in-cab
controller).
1 Condenser unit
2 Evaporator
10
INSTALLATION MANUAL
Figure 3 - Refrigeration unit Zero Direct-Drive
3
Series Zero Direct-Drive
Z200 | Z250 | Z350 | Z380
In-cab controller
Refrigeration unit
Z380 Multi
rev.01