GNSS Module Series
Step 5: Upon successful firmware download, the GNSSFlashTool green progress bar on the screen will
indicate "100%".
Figure 17: Successful Firmware Download – Step 5
7.2. Firmware Upgrade in Normal Operating Mode
Before you start the firmware upgrade process, connect the EVB to a PC with a Micro-USB Cable.
First: Connect the EVB to a PC with a Micro-USB Cable.
Second: Flip the Power Switch (S101) to OFF position before powering on the EVB.
Step 1: Open GNSSFlashTool or click "Tools" and select "Firmware Download" in QGNSS tool.
Figure 18: Firmware Upgrade – Step 1
LG69T(AA,AD)_EVB_User_Guide
27 / 31