NOTE
Please note that the hybrid GNSS/DR navigation mode will not be available until a proper calibration
procedure is performed, and that only single GNSS navigation will be available.
4.3. Calibration Result Monitoring
The calibration result will be reported in an NMEA message. The following figure illustrates how to check
the calibration status message.
Step 1: Enter the related software command in the "Text Console" to filter out the NMEA message, as
shown in the figure below. For more information on the command, see document [1].
Step 2: When the fifth parameter becomes "1", it means that the whole calibration procedure has been
completed.
LG69T(AA,AD)_EVB_User_Guide
Figure 6: LG69T (AA) Calibration Status
GNSS Module Series
18 / 31