6
Test via QGNSS Tool
This chapter explains how to use the QGNSS software tool for verifying the status of GNSS modules. You
can request the QGNSS from Quectel Technical Support. For more information on QGNSS use, see
document [3].
6.1. QGNSS Setting
Step 1: Assemble the EVB components.
Step 2: Flip the Power Switch (S101) to ON position to power on the EVB.
Step 3: Start the QGNSS and click "Setting" and "Serial Port Configuration". In the "Model" list, LG69T
(AA) module select "LG69T", and LG69T (AD) module select "None" (the LG69T (AA) module
supports 460800 bps
3
UART interface default settings vary depending on software versions.
LG69T(AA,AD)_EVB_User_Guide
and LG69T (AD) module supports 115200 bps
3
Figure 10: COM Port Setting Interface of QGNSS
GNSS Module Series
3
by default).
21 / 31