Figure 4-1: Easyview Main Screen - Tyco Galaxy SC Controller Manual

EasyView
Configuration
4 - 44 Configuration
Tyco Electronics Galaxy SC Controller J85501F-1
File Connect Configure
Office 1
MIN DC1 HFV
WRN PS1 PFD
WRN DC1 SNC
1 BDFB 1 Load Current
2 BDFB 2 Load Current
3 BDFB 3 Load Current
4 Charge Current
Avg. Pilot Cell Temp
5
6

Figure 4-1: EasyView Main Screen

Refer to Figure 4-2 for the drop down box showing the Configure menu
of EasyView. This menu contains all of the Galaxy SC software
configurations available through EasyView. The Configure menu
choices described below are those most important for the initial
configuration of Galaxy SC. Some selections, such as Data Switch or
Monitoring, will only be used if these additional Intelligent features
have been equipped. All possible selections will not be covered in this
manual, but help concerning any of the Configure selections may be
obtained by selecting the Help choice of the Main Menu or by pressing
<F1> at any time.
EasyView
Control Status Reports Options
01
1 2 3 4
Site Description
01/01/1994 01:04AM
01/01/1996 01:04AM
01/01/1996 01:04AM
118.00 A 14
102.00 A
15
100.00 A 16
10.00 A
17
78.10 F
18
19
00451 FLOAT -66.00 V 0 A 1 Alarms 4 Warnings 09:00PM
Help
High Float Voltage
Password At Default
Shunt Not Configured
09:23
Issue 13 February 2001