Mix Entry - PROALL Mobile Mixer Operator's Manual

1.04 MIX ENTRY

1
7
10
14
2
1. Use the arrows to navigate through the different mix designs database.
2. Load button. Mix designs can be loaded from a USB stick. The mix design file is a specially formatted CSV file. This
file can be loaded from a previous back or edited in Excel and loaded back in.
3. Menu shortcut. Return to the main menu.
4. Home shortcut. Return to the home screen.
5. Calculate button. The display can calculate the gate setting value and the total counts required. These values are
calculated depending on the aggregate and powder materials selected in the calibration screens.
6. Save button. It saves the current mix design.
7. Mix design number. The mix entry menu can hold up to 50 mix designs. Select the mix number by navigating using
the up and down arrows.
8. Define a name for your mix design.
9. Belt counts can be auto-calculated or manually entered if calculated elsewhere.
10. Gate position can be auto-calculated or manually entered if calculated elsewhere.
11. Sand weight required for the mix design.
12. Cement weight required for the mix design.
13. Aux weight required for the mix design. Aux is an optional powder feeder.
14. Mix design strength.
15. Fibre weight required for the mix design, if equipped.
16. Cement set is always 100% unless optional lean valving installed. Lean setting dependant on the valve installed,
but typically 50%.
17. Aux set is the auxiliary powder feeder setting relative to the belt.
Operator's Manual, Ranger Gunite r1.0
8
11
15
12
16
3
9
13
17
4
5
6
pg. 7