PROALL Mobile Mixer Operator's Manual page 25

14. Absorption percentage of the material. This value is used to correct for SSD moisture contents if moisture reading
is not free moisture.
15. Calculated average weight per count for each gate position in the calibration.
16. Calculate the average weight per count for the current trial.
17. Data is automatically saved when new values are entered, however, it is a good idea to SAVE before the gate is
changed or a calculation is done.
18. Reset trial and trial load pop-up. See page 27.
19. Calibration files can be loaded onto the display using the USB port. Calibration files can be copied to a USB stick
and re-loaded at any time or edited in Excel and loaded.
20. Yield correction allows the user to enter a +/- value to correct the calibrated curve to match yield test results.
21. Calculated gate slope/curve based on trial data. This curve is used to calculate the gate settings on the mix entry
screen. See page 26.
Operator's Manual, Ranger Gunite r1.0
pg. 25