Table of Contents
Advertisement
1.13.1.1 MIXER OPTIONS
1. Close pop-up when selection is complete.
2. Auger wash is not active in this version.
3. Gate material is an ultrasonic sensor on the sand gate that monitors if sand is being metered by the gate or if the
sand bin is empty. It will turn off the belt if no sand is detected.
4. Fibre hydraulic is an optional hydraulically driven pre-chopped fibre dispenser.
5. Gates verify is a sensor mounted on the gate wheel to measure gate position. It verifies if the gate height is
properly set based on the mix selected.
6. Cement low is an option cement low-level sensor above the sump of the cement bin. This will stop the belt if no
cement is detected above this level.
7. Aux pump is not active in this version.
Operator's Manual, Ranger Gunite r1.0
2
3
4
1
5
6
7
pg. 31
Advertisement
Table of Contents
