Gates Calibration Reset And Trials - PROALL Mobile Mixer Operator's Manual

1.12.2.2 GATES CALIBRATION RESET AND TRIALS

1. Close pop-up when selection is complete.
2. Load the counts generated by the auger in each trial using the load buttons. The button numbers refer to the
trials/samples collected 1 through 3.
3. Reset the belt counter to zero to start the next trial.
4. Zero all the existing trial values for the selected gate setting to start over and re-enter trial data.
Operator's Manual, Ranger Gunite r1.0
2
3
4
1
pg. 27