File Copy - PROALL Mobile Mixer Operator's Manual

1.13.2 FILE COPY

8
1. Menu shortcut. Return to the main menu.
2. Home shortcut. Return to the home screen.
3. Copy file buttons will copy the selected mixer file to a USB stick for backup or editing purposes. Make sure a
USB stick is inserted into the back USB connector before pressing the copy button. The USB port is behind the
display. Remove both of the front panel screws, and fold the panel down to access this port.
4. Mixer settings can be loaded onto the display. This is useful if a display is replaced and settings need to be
changed from the defaults.
5. The mixer settings can be saved to a file. Mixer settings include all mixer settings, lube cycles, vibrator times, etc.
6. Move the mix log file to a USB stick and start from a new file.
7. Delete mixer files. Be careful not to delete a mixer file unless you are prepared to re-load or re-enter the data.
8. After files are copied the USB stick must be ejected before removing it from the display USB port. There is a
message next to the eject button that shows the USB stick status.
Operator's Manual, Ranger Gunite r1.0
3
7
4
5
6
1
2
pg. 32