Mixer Settings - PROALL Mobile Mixer Operator's Manual

1.13 MIXER SETTINGS

1. Menu shortcut. Return to the main menu.
2. Home shortcut. Return to the home screen.
3. Mixer Controls settings screen. See page 29.
4. Mixer files screen. See page 32.
5. Factory Settings screen. This screen is password protected and only used for factory mixer parameters.
6. Change unique truck number here.
7. To change company information press this object and a pop-up screen will appear with company information. See
page 33.
8. Basic user level control can be set here. There are 4 different levels of password protection for the screens. Each
level is shown below:
Level 0: All menu screens are accessible without password protection.
Level 1: Mix Entry and Mix Calibration are password protected.
Level 2: Same as level 1 plus Mixer Settings are password protected.
Level 3: Same as level 2 plus Job Log is password protected.
9. The password required to enter level protected screens.
10. Software version information.
11. Gate max is currently only used in error checking for mix design calculation.
Calculation mode is not currently used in this version. Mix design calculations are based on cement weight at
100% setting by default.
Operator's Manual, Ranger Gunite r1.0
6
7
8
9
3
4
11
5
1
2
10
pg. 28