Powder Calibration Reset And Trials - PROALL Mobile Mixer Operator's Manual

1.12.1.1 POWDER CALIBRATION RESET AND TRIALS

1. Close pop-up when selection is complete.
2. Load the counts generated by the auger in each trial using the load buttons. The button numbers refer to the
trials/samples collected 1 thru 3.
3. Reset the auger counter to zero to start the next trial.
4. Zero all the existing trials to start over and re-enter trial data.
Operator's Manual, Ranger Gunite r1.0
2
3
4
1
pg. 23