Table of Contents
Advertisement
1.03 MENU
1. Mix designs are loaded and entered here.
2. Customer required mix design is selected here.
3. Current mix totals before reset.
4. Redundant mixer controls, over-rides and function selections can be found here.
5. The last 25 jobs are stored here. They can be viewed or re-printed.
6. Current date and time.
7. Lifetime production since in operation. Total is updated after reset.
8. Total hours the belt has run.
9. Set date and time, units, print data selection and display brightness can be found here.
10. Calibration data for powders and aggregates are entered here.
11. Configuration values for the mixer are entered here.
12. Digital Readouts. Digital display of mix process values such as counts and rpm.
13. Hydraulic and electrical diagnostics can be viewed here along with an alarm log, for troubleshooting purposes.
14. Home shortcut. Return to the Home screen.
Operator's Manual, Ranger Gunite r1.0
1
2
6
3
4
7
5
8
9
10
11
12
13
pg. 6
Advertisement
Table of Contents
