Hardware And Software Requirements - PC Chips CMI8330 English Manual

Media Rack
Hardware/Software
• Software Wavetable
128 instruments and percussion sets
Up to 32 dynamically allocated voices
Hardware mixing: MIDI and Wave
• Software configurable I/O Address, IRQ, DMA channel for all
interface (Jumperless)

1.3 Hardware and Software requirements

The CMI8330 can be installed in any IBM PC/XT, AT or compatible
computer. To successfully install the CMI8330, you must have the following
hardwares and softwares.
A) Hardwares
IBM PC/XT, AT, 386, 486 or compatible computer with the following:
• One or more 3.5" floppy drive
• One available 16-bit ISA slot
• MGA, CGA, EGA or VGA (VGA recommended)
• Minimum of 40 MB Harddisk with at least 4 MB of free space
• At least 1 MB of RAM (conventional & extended),
4 MB recommended
• Microsoft or compatible serial mouse
• 80486 or above CPU (Pentium is recommended)
B) Software
• MS-DOS 5.0 or greater
• Microsoft Windows 3.1 / Windows 95
NOTE:
Above requirements are minimum requirements. You may be required to aquire
more hardwares or softwares to use the CMI8330 functions to its full extent.
Section 1- Hardware Introduction
3
System Mixer