Table of Contents
Advertisement
Media Rack
7. Please click "Auto Rewind" and "Auto Repeat" , then "OK".
Hardware/Software
8. Press play key of "Media Player".
At this moment , you can hear the sound from "The Microsoft Sound"
4.4.2 Prepared for recording.
1. Click "Start" key
2. Moved the mouse cursor to "Programs".
3. Then move the cursor to "CMI8330 Audio Rack"
4. Select item "Audio Rack" and click.
5. Now you can see the Audio Rack program shown on your screen.
6. Set recording channel into "Wave" from mixer program
7. Click the red spot on wave player to start recording.
8. Now you can see the recording function works fine here.
Note: If there is no problem when playing WAV in "Media Player" and
recording WAV in "Audio Rack", then your Full-Duplex sound system
should work OK now.
4.5 Software Wave-Table
If you want to use Software Wave-Table drivers as MIDI output device, please
open "Multimedia" icon in "Control Panel" selecting "MIDI" page,
and click on "C-Media SoftMidi Driver" then select "OK" button
to confirm.
Because of Software Wave-Table output use one wave device to output, for
Software Wave-Table can play with wave file at same time, We switch FM
channel of mixer to output second wave source. That is if you play MIDI file
(Software Wave-Table) and play another wave file at same time, you must
adjust wave or FM channel of mixer to control volume.
Note: Software Wave-Table Driver only supports Windows 95 system and
will spend more CPU time when play MIDI files. For more finest executing
performance, we recommended that use Pentium CPU and 16M DRAM(or above).
Section 4- Installation of Windows 95
22
System Mixer
Advertisement
Table of Contents
